Countersunk metal plate 20x12x3 mm.

Oblong metal plate with screw hole for countersunk screw. Use this metal plate as a magnetic counterpart.

This is not a magnet!

Made of magnetic steel. The easy way to make a magnetic point to hang a magnet on - like a small magnetic board.

Not suitable for outdoor use - water and windy conditions will make it rust.

Can be combine with all types of magnets.

Use a screw with a cone head (countersunk) in order to get a flat surface. Screw size 4,7 mm. to 5,7 mm. is the ideal size for this metal plate.

SPECIFICATIONS:
Size: 20x12 mm.
Height: 0.3 cm.
Screwhole: ø 5.7 mm. (M5)
Countersunk total: Ø11.7 mm.

The metal pieces are made for use with countersunk screws, so you get a completely flat surface (necessary when using them with magnets). There is room for a screw head of max. Ø11 mm., and the perfect screw size is 3x5 mm. in thickness. There is a big difference in the height of the screw heads, so remember to test that you get a flat surface with your screws before screwing the metal piece.