Rubber magnet (white) w. internal thread, Ø31 mm.

Small but strong pot magnet with a rubber cap and internal steel thread (M5).

The magnet itself is made of neodymium N42. The coating is made of white rubber.

Diameter: 3.1 cm.
Height: 0.6 cm.
Thread: M5
Strength: approx. 8 kg.

Screw this magnet on another magnet with treaded stud or use a normal screw or a M5 bolt.

The internal steel thread is continuous - you can screw all the way through the rubber coating eventhough the magnet is covered with rubber all the way on one side.

Can be used on magnetic glass boards - but keep in mind that a magnet with a strength of 8 kg. is a quite strong magnet. So be careful.

Sold individually - just buy the quantity you need. Here at Magnetpartner, we don't force you to buy packages. But if you need many magnets, you get a large discount, of course.

NB! You can place two of these white rubber magnets directly against each other as this model is made with 4 small magnets. This means that the magnets can both repel and attract another magnet of the same type; just rotate the magnet a bit to switch between repulsion and attraction.

The strenght of 8 kg. is measured in a direct pull with full metal contact. If you move the magnet away from the magnetic counterpart, the magnetic force will decrease by 70% at a 2 mm. distance and by 92% at a 5 mm. distance.

Made for indoor use as the steel thread is not made of stainless steel. But when used with a M5 bolt, it will not rust as easily as if the thread is bare.

SPECIFICATIONS:
Strength: approx. 8.000 g.
Magnetism: N42
Materiale: NdFeB
Steel thread: Q235
Coating: Rubber (white)
Magnet type: Neodymium

Find data sheet for the rubber magnets here.